http://brs.li/1MvT2ci Plus升级套件将您的“基础”RO/DI模型转换为功能更丰富的Plus系列。今天就跟着我们一起安装吧!Plus升级套件配有TDS仪表，压力表和冲洗套件。TDS仪表将测量总溶解固体，这是一个相对的测量水纯度从你的反渗透系统，以及你的DI树脂，最终是你正在使用的水。压力表测量进入反渗透膜的水压，理想情况下应该在50 PSI左右。冲洗套件基本上是膜上的流量限制器的旁路。这将大大增加膜表面的流量，冲掉沉积物，从而影响膜的使用寿命、水质和产水。安装非常简单，首先我们建议放一条毛巾，以防任何可能的泄漏。冲洗套件的安装非常简单，只需将流量限制器上的推接夹插入，然后将其拆卸，然后将其替换为新的冲洗套件。这与你安装它的方向有关，所以一定要确保流动箭头指向远离薄膜。 To install the pressure gauge, locate the feed line on your RO membrane which is the side which is the on the cap side of the housing which only has a single line entering it. If this is a BRS system it will likely be red. Just clip this line and push both ends into the tee on your pressure gauge. The TDS meter installation can appear pretty daunting, but in reality is actually pretty simple. The first step is mounting the monitor. Use the included Velcro stickers to mount it somewhere easy to see and insert the probes into the push connect tees. One probe is labeled in and the other out. On the back of your system locate the line feeding the “in” of your DI canister, clip that line and insert each end into the tee labeled “in”. Now locate the line coming out of your DI, clip it and insert each end into the tee labeled “out”. Once that is done bundle up the excess wire and secure it. Once everything is installed check for leaks and you are done! Have questions? Let us know in the comments below! Be sure to hit subscribe so you don't miss our new video coming out next Friday. Connect with us on Facebook: http://www.facebook.com/BulkReefSupply Check out our pics on Instagram: http://instagram.com/bulkreefsupply *Legal Stuff* The purpose and content of this video is to provide general information regarding the products and their applications as presented in the video. Aquatic sales solutions, inc. And its officers, directors, employees and agents disclaim all express or implied warranties, in any way, related to the products and their application as presented in this video, make no representation or warranty regarding the products and the application as presented in this video and shall not be liable for any direct or indirect losses or damages of any type, including but not limited to punitive damages, or from personal injury or death resulting from or in any manner related to the video, and the products in and contents of the video. The viewer expressly agrees that aquatic sales solutions, inc. and its officers, directors, employees and agents shall not be liable for any damages or losses related to the products in and content of the video and hereby agrees to hold the foregoing harmless from any such losses or damages.
